Branch logger (wood chipper) JIRBO-JUMBO E is the top performance machine for producing rough chips. High performance of the machine is able to compete with smaller firewood processors. In comparison with firewood processors wood chipper JIRBO-JUMBO E shows significantly faster processing of smaller trees with lower purchasing price and lower operating costs. Branch logger behind the tractor JUMBO E is characterized by a very high hourly performance and by the ability to process branches with diameter up to 180mm. Thanks to the high performance of the machine, it is possible to insert more branchecs at the same time. The wood chipper with an electric motor is very suitable for processing wood waste from sawmills (planks, laths, boards, landscapes, corks). These impressive parameters are provided by the sufficient gear ratio, flywheel, and a high-quality crushing device. The chipper is also equipped with a conveyor which allows continuous movement of the chips straight to the tow. The result is an increase in the performance of the machine per hour.
The machine is powered by three-phase electric motor of 18,5 kW. It is equipped by the startup feature "soft-start" which enables a significant reduction in the load of the electrical network when starting the machine. A belt transmission is used to drive the machine, which ensures protection of the machine from overloading.
The machine features |
---|
Folding hopper |
Serving of branches |
Conveyor - effective hourly output of machines, wood chips are transported directly to the lift |
flywheels - high performance of the machine |
Sufficient gear – optimum speed of serving of branches and sufficient strength of the crushing device |
Powder coating - high surface finish resistance |
STOP handle - stops the machine after pressing |
Technical parameters | |
---|---|
Maximum diameter of processed material (soft fresh wood) | Ø 180 mm |
Maximum diameter of processed material (dry hardwood) | Ø 150 mm |
Power of the machine | 21 m³/hour |
Chip length | Dependent on branch diameter (150 mm to 260 mm) |
Dimensions (height x width x length) | 2900 mm x 1200 mm x 2000 mm (transport position) |
Machine weight | 1200 kg |
Number of knives | 6 |
By submitting this form, I acknowledge that I am sending my private data to Jirbo s.r.o., which will be used only for the purpose of answering a query, making an offer and contacting the sender of the data. The company guarantees that the submitted data will not be provided to third parties.